Can't figure out which cord
is which? Use the key below:

9V/12V Power Plug

RCA Audio Plug

Mini Audio Plug

RJ11 Phone Plug

RJ22 to Cordless Adapter (Male)

RJ22 to Cordless Adapter (Female)

RCA to Mini Audio Adapter

RJ11 Duplex Jack (Splitter)


Part 1: Connecting to Ordinary Phones via On-Hold Adapter Module:

Follow these 6 simple installation steps, and you'll have your OHP-7500 series connected to an analog phone system in no time.

Step 1:
Plug the AC adapter into a 110V power outlet.		 Step 2:
Plug the other end of the power cord into the 9V DC jack on the back.		 Step 3:
Plug one end of the supplied 6' phone cord into the jack labeled "1/2/3" on the back of the unit.
Step 4:
Plug RJ11 duplex jack into the phone plug socket coming out of the wall, and connect the other end of the 6' phone cord coming from the unit.		 Step 5:
Plug the other supplied 6' phone cord into the other side of the RJ11 duplex jack.		 Step 6:
Plug the other end of the 6' phone cord into your phone. That's all there is to it!

Part 2: Installing the TEHMA

Follow these 6 simple installation steps, and you'll have the TEHMA connected to an analog phone system in no time.

Step 1:
Disconnect the handset from the base unit of the phone.		 Step 2:
Plug the end of the handset cord into the "A" side of the TEHMA		 Step 3:
Plug one end of 3" RJ-22 connector cable into the "B" side of the TEHMA
Step 4:
Plug the other end of the 3" RJ-22 connector cable into the base unit of the telephone.


Home | Products | Services | Online Store | Support | About Us | Contact Us | Press Releases | Reseller Info | Product Registration | Site Map
©IntelliTouch Communications
On-Hold Plus is a registered trademark of IntelliTouch Communications